FORGED IN THE USA!
YETI XD™ JL/JT Track Bar Relocation Bracket
YETI XD™ JL/JT Track Bar Relocation Bracket
$ 169.00

$ 186.00

YETI XD™ JL/JT Track Bar Relocation Bracket

YETI XD™ JL/JT Track Bar Relocation Bracket

 by Steer Smarts Part number: 79022001
 

The YETI XD™ Track Bar relocation bracket is designed to correct the geometry of the track bar on Jeep Wrangler JL's that are equipped with a top-mounted draglink. This easy bolt-on solution will ensure that the track bar and top-mounted dragline are in proper alignment and aid in the reduction of bump steer. The YETI XD Track Bar relocation bracket is fabricated from 1/4" steel and E-coated for maximum durability. It includes all necessary hardware and installs in just minutes with basic hand tools. 

***Note*** JL/JT Fox brand stabilizers w/ machined bushing will not fit w/o modifying the bushing slightly -- a few mm will need to be removed to fit properly.



Features

TRACK BAR RELOCATION BRACKET:
  • Easy bolt-on installation.
  • E-coated for a long lasting appearance under harsh conditions.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • Fabricated from 1/4" Steel for greater buckling, impact, and fatigue strength.
  • Designed to correct Track Bar geometry on Wrangler JL's equipped with a Top Mount Draglink.
  • Includes all necessary installation hardware.
  • MADE IN THE USA 

*The YETI XD Track Bar relocation bracket fits all left-hand drive 2018+ JL/JLU Wrangler models equipped with 4.5" or greater lifts that have checked clearances and appropriately bump-stopped the vehicle.

*Does not work with Quick Disconnects

 



Installation

INSTALL TIME

(approx) 1/2 Hour

 

SKILL LEVEL

Moderate Mechanical Skill Required 

 

TOOLS

  • Basic Hand Tools

  • Torque Wrench

  •    

     

    INSTRUCTIONS

    YETI XD Track Bar Relocation Bracket


     

     
     

    See what the Jeep Wrangler Forum members have to say about the YETI XD Track Bar Bracket.



    Customer Reviews

    Based on 3 reviews
    67%
    (2)
    0%
    (0)
    33%
    (1)
    0%
    (0)
    0%
    (0)
    h
    hooked on phonics
    oops I cut off my track bar mount!

    The video provided is not for this bracket, it is for the JK bracket. The written instructions shows what appears to be a stripped down axle under the title, "remove stock stabilizer mount". I know, I know, read the instructions carefully. I cut away the track bar, sway bar link mount away and now I have the fun of fabricating my own replacement. It's ok, I am a pretty good welder and I will manage, but what a headache. Please provide the right video and a better picture on step 7. Stupid, stupid, stupid...Thanks!

    J
    Jose Torres
    JLUR Top Mount Drag link - Track bar relocation bracket

    I made a mistake and posted my long review on the "no drill top mount" link. Please see that review under my name. The second half of the paragraph talks about this bracket.
    The only comment I didn't make on that other review which I Thought about afterwards was that the bracket is actually kinda thin given how long it is and what it's supporting, HOWEVER I don't question the integrity. As an Engineer I understand the design and the design to ensure it's tough. I'll also point out that I know I'd be able to easily make a weld repair if I ever damage it. I also know that it probably couldn't be made thicker otherwise it would allow for the correct spacing for the Yeti drag link and other hardware. Either way not questioning the product, just making note for anyone who purchases this bracket. I'm looking forward to my next purchase lol. (the track bar / steering box reinforcement bracket on the frame side.

    M
    MikeF
    Great part!

    What a quality heavy duty and well built part. Fit perfectly and was easy to install. I ordered several items direct through SS and have been more then pleased every time! Highly recommend them and would not hesitate to give them a call or email them.

    Customer Reviews

    Based on 3 reviews
    67%
    (2)
    0%
    (0)
    33%
    (1)
    0%
    (0)
    0%
    (0)
    h
    hooked on phonics
    oops I cut off my track bar mount!

    The video provided is not for this bracket, it is for the JK bracket. The written instructions shows what appears to be a stripped down axle under the title, "remove stock stabilizer mount". I know, I know, read the instructions carefully. I cut away the track bar, sway bar link mount away and now I have the fun of fabricating my own replacement. It's ok, I am a pretty good welder and I will manage, but what a headache. Please provide the right video and a better picture on step 7. Stupid, stupid, stupid...Thanks!

    J
    Jose Torres
    JLUR Top Mount Drag link - Track bar relocation bracket

    I made a mistake and posted my long review on the "no drill top mount" link. Please see that review under my name. The second half of the paragraph talks about this bracket.
    The only comment I didn't make on that other review which I Thought about afterwards was that the bracket is actually kinda thin given how long it is and what it's supporting, HOWEVER I don't question the integrity. As an Engineer I understand the design and the design to ensure it's tough. I'll also point out that I know I'd be able to easily make a weld repair if I ever damage it. I also know that it probably couldn't be made thicker otherwise it would allow for the correct spacing for the Yeti drag link and other hardware. Either way not questioning the product, just making note for anyone who purchases this bracket. I'm looking forward to my next purchase lol. (the track bar / steering box reinforcement bracket on the frame side.

    M
    MikeF
    Great part!

    What a quality heavy duty and well built part. Fit perfectly and was easy to install. I ordered several items direct through SS and have been more then pleased every time! Highly recommend them and would not hesitate to give them a call or email them.