YETI XD™ JL REAR ADJUSTABLE TRACK BAR
YETI XD™ JL REAR ADJUSTABLE TRACK BAR
YETI XD™ JL REAR ADJUSTABLE TRACK BAR
$ 285.99

YETI XD™ JL REAR ADJUSTABLE TRACK BAR

Customer Reviews

Based on 8 reviews
88%
(7)
13%
(1)
0%
(0)
0%
(0)
0%
(0)
W
William Maddox
Adjustable Front and Rear Track Bar

These track bars are stout and easy to install. It took all of 30 minutes to install both of these track bars....and that includes the time spent applying unpacking and applying seize free. The ride is better than factory. I installed these after installing the Mopar 2" lift kit. Even before the lift kit was installed, the wheels were way out of alignment. Now, the wheels are within 1/8". Highly recommend these track bars. One suggestion for the company...include the torqued measurement with the track bar. I took an educated guess but would have rathered knowing for sure.

R
Ron Sonedecker
Stout, well made, strong - but does not fit with certain braces or brackets

This bar looks as well made as the front bar that I have installed. It's large, heavy, and strong, and very adjustable. If it's anything like my front bar, it's an awesome piece - so 5 stars is what it gets.

However, because of the unorthodox shape of the ends of the bar, it does not fit with either the synergy frame-side brace or the Teraflex axle-side bracket - in both cases, the thick neck on both ends impacts the bracket or brace. This should be noted.

It's possible that you could rotate the frame-side head 180 degrees to get the opposite effect, but that would not be the recommended installation orientation and the angle would be different - but you cannot rotate the axle-side end because of the intended bend of the bar to go under the exhaust.

So just be aware when getting this bar, the funny shape of the ends could cause clearance issues in many cases except stock bracket implementation.

J
Justin Rayne
Fixed my alignment

This is a heavy duty adjustable track bar that is stronger than the Non-adjustable factory counterpart. I was able to install easily and adjust the sleeve until the thrust angle came into spec with a 2.5” lift.

J
Jon Kirby
Wow

The fit, finish and design are top quality. I only put the best components on my Jeep and this is one of them. I love the red because people will know what BEEF I have under my Jeep.

L
Leemen Upfit
Best on the market

Best track bar money can buy!! From the quality of the powder coat to the overall design.

YETI XD™ JL Adjustable Rear Track Bar (2018+)

 by Steer Smarts Part number: 75061001
 

The YETI XD™ Rear Adjustable Track Bar is fully adjustable on the vehicle and is designed to be the strongest rear track bar available for the Jeep Wrangler JL/JLU. 

 


Features

REAR ADJUSTABLE TRACK BAR:

  • Easy bolt-on installation.
  • Works on stock height (no lift) up to 6.5" lift
  • E-coated and powder coated for a long lasting appearance under harsh conditions.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • Forged steel ends for greater buckling, impact, and fatigue strength.
  • Designed to correct Track Bar geometry on the Jeep Wrangler JL
  • Fully adjustable on the vehicle
  • Includes all necessary installation hardware.
  • MADE IN THE USA 

The YETI XD Track Bar fits left-hand drive 2018+ to Current JL/JLU Wranglers.

 


Installation

INSTALL TIME

(approx) 1 Hour

 

SKILL LEVEL

Moderate Mechanical Skill Required 

 

TOOLS

  • Basic Hand Tools
  • Torque Wrench

   

INSTRUCTIONS

YETI XD Rear Track Bar


 

REVIEWS



Customer Reviews

Based on 8 reviews
88%
(7)
13%
(1)
0%
(0)
0%
(0)
0%
(0)
W
William Maddox
Adjustable Front and Rear Track Bar

These track bars are stout and easy to install. It took all of 30 minutes to install both of these track bars....and that includes the time spent applying unpacking and applying seize free. The ride is better than factory. I installed these after installing the Mopar 2" lift kit. Even before the lift kit was installed, the wheels were way out of alignment. Now, the wheels are within 1/8". Highly recommend these track bars. One suggestion for the company...include the torqued measurement with the track bar. I took an educated guess but would have rathered knowing for sure.

R
Ron Sonedecker
Stout, well made, strong - but does not fit with certain braces or brackets

This bar looks as well made as the front bar that I have installed. It's large, heavy, and strong, and very adjustable. If it's anything like my front bar, it's an awesome piece - so 5 stars is what it gets.

However, because of the unorthodox shape of the ends of the bar, it does not fit with either the synergy frame-side brace or the Teraflex axle-side bracket - in both cases, the thick neck on both ends impacts the bracket or brace. This should be noted.

It's possible that you could rotate the frame-side head 180 degrees to get the opposite effect, but that would not be the recommended installation orientation and the angle would be different - but you cannot rotate the axle-side end because of the intended bend of the bar to go under the exhaust.

So just be aware when getting this bar, the funny shape of the ends could cause clearance issues in many cases except stock bracket implementation.

J
Justin Rayne
Fixed my alignment

This is a heavy duty adjustable track bar that is stronger than the Non-adjustable factory counterpart. I was able to install easily and adjust the sleeve until the thrust angle came into spec with a 2.5” lift.

J
Jon Kirby
Wow

The fit, finish and design are top quality. I only put the best components on my Jeep and this is one of them. I love the red because people will know what BEEF I have under my Jeep.

L
Leemen Upfit
Best on the market

Best track bar money can buy!! From the quality of the powder coat to the overall design.