SECTOR SHAFT BRACES

Choose Your Model

Jeep JK Jeep JL & JT RAM
Steer Smarts Sector Shaft Braes

Why YOU NEED A SCTOR BRACE?

Enhanced Steering Control

Steer Smarts' Sector Shaft Brace reinforces the factory steering box, sector shaft, and frame-side track bar mount — delivering sharper steering input, tighter control, and safer, more predictable handling.

ELEMINATES SLOPPY STEERING WHEEL FEEL

Tighten up that numb, dead spot at the top of the steering wheel that's caused by deflection in the steering gear. The Sector Shaft Brace adds a second shear point to the sector shaft under the pitman arm, eliminating that deflection so the steering wheel feels firm, tight, and connected.

EXTEND THE LIFE OF YOUR STEERING BOX

Replacing a steering box is expensive. The Sector Shaft Brace eliminates flex and deflection in the gear — reducing wear on the internal gears, preventing stress fractures in the sector shaft, and stopping the premature seal wear that causes your box to leak.

Find Our Store
Find My Location Icon
More » Less «
  • List
  • Map

    PERFORMANCE FOR EVERYDAY ADVENTURE

    Whether your rig is stock, lifted, or modified, the Sector Shaft Brace tightens the connection between you and your vehicle. Sharper steering feel. Firmer engagement. More precise input. The result is a Jeep or truck that drives better, handles better, and feels safer in your hands — every single day.

    The STEER SMARTS DIFFERENCE

    • Sealed Roller Bearing

      Precision sealed roller bearing design for low-friction movement and quiet operation.

    • Magni Coated Hardware

      O.E. grade magni coated hardware for extreme corrosion resistance in all weather.

    • Fully Welded Construction

      Heave gauge steel construction that is fully welded for maximum strength.

    • MADE IN THE USA!

      Proudly designed, tested, and built in the Heartland of the USA!

    Watch it here!

    Truck U Sector Shaft Brace

    - JAMES VERNON

    ★★★★★

    "Rubicon on 35s, steering was everywhere!!! Replaced tie rod, drag link, track bar, wheel hubs, at the same time..... steering still everywhere. Installed this brace.....steering is back to normal!!! Im soo happy!!! Haven't driven with 1 hand for years!!! Now I can!!!!"

    - Eric Kinsella

    ★★★★★

    "The best upgrade so far. Before I was always moving the steering wheel to keep the jeep straight. Steering is nice and tight now. The wondering is gone. If I buy another jeep this will be the first thing I purchase for it."

    - Anthony Day

    ★★★★★

    "I have the steel steering box upgrade on my JL Rubicon. The steering was still sloppy. This brace made a significant improvement. The steering feels much tighter. I highly recommend."

    - Mark Lozano

    ★★★★★

    "Any honest Jeep owner will admit that a Jeep handles like a balloon on the highway. Steering it at speed is a full time job...it sucks. Add a Steer smarts bracket and you have a different, responsive well mannered vehicle. I doo not know why the factory does not do this! it should be mandatory!"

    - T A Hartless

    ★★★★★

    "I have a Gladiator with 37" KM3s, after 16k miles I could tell something was a little off with the truck at high speed and I didn't trust moving the larger tires at slow speed in tight spots. This brace has made the truck feel completely different " like a new unmodified truck" This should be the first upgrade you make when installing larger tires and lift, or even if you keep the JT or JL in stock form. You will thank yourself immediately."

    Jeep JK Sector Shaft Braces

    View all

    Jeep JL & JT Sector Shaft Braces

    View all

    RAM Sector Shaft Braces

    View all

    • Forged in the USA!

    • Limited Lifetime Warranty

    • Visit our support center

      Expert help & advice

    • Check your order status

      Updates & tracking
    Back to top