YETI XD Track Bar Pro-Series Polyurethane Bushing Inserts
Pro-Series bushing upgrade for YETI XD Track-Bar
***NOTE***PRESS REQUIRED FOR INSTALLATION***
You must have the old bushing pressed out and you will then need to press in the pro-series poly bushings.
1. Press out stock bushing.
2. Press in the silver outer sleeve.
3. Grease the inside of the silver sleeve.
4. Press Poly Bushing into end.
5. Press gold sleeve into poly.
6. Repeat steps 1-5 for opposite track bar end.
(approx) 3/4 Hour
Moderate Mechanical Skill Required