Yeti XD No Drill Top Mount Draglink JL/JLU
Yeti XD Draglink JL/JLU
Yeti XD Draglink JL/JLU
Yeti XD Bottom Mount Draglink JL/JLU
Yeti XD Bottom Mount Draglink JL/JLU
Yeti XD No Drill Top Mount Draglink JL/JLU
Yeti XD No Drill Top Mount Draglink JL/JLU
$ 429.99

Yeti XD Jeep Wrangler JL/JT Draglinks

YETI XD™ Jeep Wrangler JL/JT Draglink (2018+)

 by Steer Smarts

Drag Link Part # 
Bottom Mount: 78075001
No-Drill Top Mount: 78078001

 

***NOTE*** A minimum lift height of 4" ( and correct bump stop) is required for a top-mount draglink. Part #79022001 (Track Bar Relocation Bracket) is necessary when flipping your draglink - it maintains proper track bar and draglink geometry. For those running METAL CLOAK Lifts, we do not recommend a top mount draglink for their lift kits d/t interference issues.

STEER SMARTS™ is proud to present the most EXTREME steering linkage for your Jeep JL Wrangler, “The YETI XD™ Series” linkage. We applied our 85 years of steering “lessons learned” to develop the strongest most durable linkage ever built for the Wrangler. 

The YETI XD "No Drill" Top Mount Draglink is a complete bolt-on for high steer applications and features our Patent Pending REVERSE TAPER MOUNT design.  The YETI XD "No Drill" is the quickest and easiest draglink flip on the market. Installation takes just minutes and there is no need to modify or alter your stock knuckle. This draglink bolts to the factory tapered knuckle hole and the factory pitman arm hole.

 

Features

YETI XD DRAGLINK ASSEMBLY:
  • Easy bolt-on installation.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • Patent Pending "No Drill" Reverse Taper Mount makes for quick and easy installation without the need for drilling or altering your knuckle.
  • FORGED IN THE USA
BALL JOINTS:
  • 30mm 1 1/2 Ton ball joints designed specifically for the JL.
  • Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage.
  • Induction heat treated ball studs provide ultimate fatigue strength and superior off-road durability.
  • Steel on steel bearings provide exceptional ball joint wear resistance and robustness.
  • High-quality seals ensure long ball joint life. Our superior seals have been rigorously tested to minimize leakage between grease service intervals which greatly improves our ball joint reliability over our competition.
  • Fully greaseable.
DRAGLINK ENDS:
  • Powder coat over E-coat for a long lasting appearance under harsh conditions.
  • External threads are e-coated for durability and long-term serviceability.
  • Forged from medium carbon high harden-ability steel and heat treated for greater buckling, impact, and fatigue strength.
  • Forged from medium carbon high hardenability steel and heat treated for even greater buckling, impact, and fatigue strength.
  • Large 1 ¼ inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.
  • Unique “Reverse Pin” technology prevents our linkage from flopping or rocking. This technology is built into the socket unlike the weak external supports on some competitor linkages.

ADJUSTER TUBE: 

  • Draglink adjuster is manufactured from large diameter ¼ inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength.
  • Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
  • Designed with right-hand and left-hand threads for quick and easy adjustment once installed on the vehicle.
  • Internal threads and tube are also e-coated for long-term serviceability.

Draglink fits all left-hand drive JL Wrangler models 2018 to Current including Rubicon and Unlimited.

Note: A minimum of 17” wheels is recommended. 16" wheels with a maximum 4.5 backspacing might fit but not guaranteed.

 

Videos

Blogs

 



Installation

 

INSTALL TIME

(approx) 1.5 Hour

 

SKILL LEVEL

Moderate Mechanical Skill Required 

 

TOOLS

-Basic Hand Tools

-Torque Wrench

-Pickle Fork

INSTRUCTIONS

YETI XD 

 

 

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
M.K.
Love this product!

We love this No-Drill Top Mount YETI XD JL/JLU Draglink. It's beefy and works perfectly for our high-steer kit. Highly recommend Steersmarts!!