YETI XD™ JK DANA UD60 "NO MOD" BOLT-IN STEERING KIT

Features

YETI XD TIE ROD + DRAG LINK ASSEMBLIES:

• Easy bolt-on installation.
• Engineered for proper clearance to other chassis components to eliminate interferences.
• MANUFACTURED IN THE USA

BALL JOINTS:

• 30mm 1-1/2 Ton ball joints are designed specifically for the JK with a UD60 (68.5" wide).
• Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage.
• Induction heat treated ball studs provide ultimate fatigue strength and superior off-road durability.
• Steel on steel bearings provide exceptional ball joint wear resistance and robustness.
• High-quality seals ensure ball joints' life is long-lived. Our superior seals have been rigorously tested to minimize leakage between grease service intervals which significantly improves our ball joint reliability over our competition.
• Fully greaseable.

TIE ROD + DRAG LINK ENDS:

• Powder coat over E-coat for a long lasting appearance under harsh conditions.
• External threads are e-coated for durability and long-term serviceability.
• Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength.
• Large 1 ¼ inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.
• Unique “Reverse Pin” technology on the passenger-side ends prevents our linkage from unwanted flopping/rocking. This technology is built into the socket unlike the weak external supports on some competitor linkages.

ADJUSTER TUBES: 

• Tie rod and Drag link adjusters are manufactured from large diameter ¼ inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength.
• Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
• Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.
• Internal threads and tube are also e-coated for long term serviceability.

INSTALL TIME

• (approx) 2 Hour

SKILL LEVEL

• Moderate Mechanical Skill Required 

TOOLS

• Basic Hand Tools
• Torque Wrench