YETI XD™ JL/JT Pro-Series Front Adjustable Track Bar (RED)
YETI XD™ JL/JT Pro-Series Front Adjustable Track Bar (RED)
YETI XD™ JL/JT Pro-Series Front Adjustable Track Bar (RED)
$ 310.00

YETI XD™ JL/JT Pro-Series Front Adjustable Track Bar (RED)

Customer Reviews

Based on 12 reviews
100%
(12)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael Hudson
Beefy but hits

Warning for those with RHD vehicles. I Bought the works for my JLU Rubicon (front and rear track bars, tie rod, drag link and stabilizer relocation). On fitment discovered that the front track bar hits on the diff even just sitting stationary. Assuming that my RHD requires different clearances for fitment. Everything else had no issue with clearance.

J
Jack Moore
beef it up

I have not mounted the Steer Smarts Yeti XD Pro front track bar yet but just holding the part it appears that its just what I wanted to beef up my JLUR; looking forward to mounting later this month once all parts arrive. Also purchased the rear tract and and drag link w the Griffin Attenuator. Will be excited for the test drive, like a kid Christmas morning.

R
Rivera Family
Track Bar and ARB diff cover

I love Steer Smarts products. I have their tie rod, drag links, sway bar end link, and stabilizer. That being said the yeti track bar hits my ARB diff cover on my Gladiator. Not steer smarts or ARB’s faults since they don’t coordinate products but just thought I’d let people know since I would have bought a different combo if I would have know . That being said, I went with a rock jock track bar to replace the SS track bar so I have enough clearance. Not a knock on steer smarts or arb. The SS track bar is very beefy.

Reviewer avatar
Russell Hall
Fantastic Value and Support

Front and Rear Track Bars have offered noticeable stability improvement. Andy in support was incredibly helpful and went above and beyond to help me install. Nothing but great things to say; great value also.

F
Forrest Kinder
Track bar for gladiator

Just received an incredibly well engendered and beefy product from SteerSmarts. I had not intended to replace the item at this time, but after experiencing atrocious steering problems on my gladiator I purchased the sector reinforcement bracket in hopes of improvement. The results were amazing. Steering fixed. There was however a problem. The bracket bearing housing contacted the stock track bar under suspension compression. That seemed dangerous to me. After contacting SteerSmarts Andy ran it by engendering and they decided to change the housing design and send me a remanufactured one. Andy also suggested that their yeti track bar would increase the clearance as well. Problem solved.
I have nothing but praise and admiration for incredible and prompt customer service. They were courteous and very willing to help me solve my issues. I can’t thank you guys enough.

YETI XD™ JL/JT Pro-Series Adjustable Front Track Bar

 by Steer Smarts Part number: 75049001
 

The YETI XD™ Pro-Series Adjustable Track Bar is fully adjustable on the vehicle and is designed to be the strongest track bar available for the Jeep Wrangler JL/JT. The Pro-Series comes with our polyurethane bushing rather than rubber, which is a harder durometer, limiting the amount of deflection allowed by the bushing. 


 


Features

ADJUSTABLE TRACK BAR:

  • Easy bolt-on installation.
  • Works on stock height (no lift) up to 6.5" lift
  • E-coated and powder coated for a long-lasting appearance under harsh conditions.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • Forged from solid steel for greater buckling, impact, and fatigue strength.
  • Designed to correct Track Bar geometry on the Jeep Wrangler JL
  • Polyurethane Pro-Series Bushing
  • Fully adjustable on the vehicle
  • Includes all necessary installation hardware.
  • MADE IN THE USA 

The YETI XD Track Bar fits left-hand drive 2018 to Current JL/JLU Wranglers & JT Gladiators.

***Track Bar cannot be guaranteed to fit with all aftermarket diff covers***

 


Installation

INSTALL TIME

(approx) 1 Hour

 

SKILL LEVEL

Moderate Mechanical Skill Required 

 

TOOLS

  • Basic Hand Tools
  • Torque Wrench

   

 

INSTRUCTIONS

YETI XD Track Bar


 

REVIEWS



Customer Reviews

Based on 12 reviews
100%
(12)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael Hudson
Beefy but hits

Warning for those with RHD vehicles. I Bought the works for my JLU Rubicon (front and rear track bars, tie rod, drag link and stabilizer relocation). On fitment discovered that the front track bar hits on the diff even just sitting stationary. Assuming that my RHD requires different clearances for fitment. Everything else had no issue with clearance.

J
Jack Moore
beef it up

I have not mounted the Steer Smarts Yeti XD Pro front track bar yet but just holding the part it appears that its just what I wanted to beef up my JLUR; looking forward to mounting later this month once all parts arrive. Also purchased the rear tract and and drag link w the Griffin Attenuator. Will be excited for the test drive, like a kid Christmas morning.

R
Rivera Family
Track Bar and ARB diff cover

I love Steer Smarts products. I have their tie rod, drag links, sway bar end link, and stabilizer. That being said the yeti track bar hits my ARB diff cover on my Gladiator. Not steer smarts or ARB’s faults since they don’t coordinate products but just thought I’d let people know since I would have bought a different combo if I would have know . That being said, I went with a rock jock track bar to replace the SS track bar so I have enough clearance. Not a knock on steer smarts or arb. The SS track bar is very beefy.

Reviewer avatar
Russell Hall
Fantastic Value and Support

Front and Rear Track Bars have offered noticeable stability improvement. Andy in support was incredibly helpful and went above and beyond to help me install. Nothing but great things to say; great value also.

F
Forrest Kinder
Track bar for gladiator

Just received an incredibly well engendered and beefy product from SteerSmarts. I had not intended to replace the item at this time, but after experiencing atrocious steering problems on my gladiator I purchased the sector reinforcement bracket in hopes of improvement. The results were amazing. Steering fixed. There was however a problem. The bracket bearing housing contacted the stock track bar under suspension compression. That seemed dangerous to me. After contacting SteerSmarts Andy ran it by engendering and they decided to change the housing design and send me a remanufactured one. Andy also suggested that their yeti track bar would increase the clearance as well. Problem solved.
I have nothing but praise and admiration for incredible and prompt customer service. They were courteous and very willing to help me solve my issues. I can’t thank you guys enough.