FORGED IN THE USA
Yeti XD Tie Rod JL/JLU
Yeti XD Tie Rod JL/JLU
$ 449.00

YETI XD™ Tie Rod Assembly - 2018+ Jeep Wrangler JL/JT WRANGLER or GLADIATOR RUBICON/MAX TOW/HIGH-ALTITUDE/4XE/MOJAVE/392

YETI XD™ JL/JT (Rubicon/Max tow/High-Altitude/4XE) 2½-ton Tie Rod

 By Steer Smarts
Tie Rod Part # 
Rubicon/Max Tow/High-Altitude/4XE/Mojave/392: 78088001

 

STEER SMARTS™ is proud to present our most EXTREME steering linkage “The YETI XD™ Series” linkage for your Jeep JL Wrangler. We applied our 85 years of steering “lessons learned” to develop the strongest most durable linkage ever built for the Wrangler. 

The YETI XD Tie Rod is a direct bolt-on for any JL Wrangler or Gladiator Rubicon/Max Tow/High-Altitude/4XE The YETI XD installs in just minutes and there is no need to modify or alter your Jeep.

 

Features

YETI XD TIE ROD ASSEMBLY:
  • Easy bolt-on installation.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • MADE IN THE USA
BALL JOINTS:
  • 30mm 2 1/2 Ton ball joints designed specifically for the JL.
  • Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage.
  • Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability.
  • Steel on steel bearings provides exceptional ball joint wear resistance and robustness.
  • High-quality seals ensure long ball joint life. Our superior seals have been rigorously tested to minimize leakage between grease service intervals which greatly improves our ball joint reliability over our competition.
  • Fully greaseable.
TIE ROD ENDS:
  • Powder coat over E-coat for a long-lasting appearance under harsh conditions.
  • External threads are e-coated for durability and long-term serviceability.
  • Forged from medium carbon high hardenability steel and heat-treated for greater buckling, impact, and fatigue strength.
  • Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength.
  • Large 1 ¼ inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.
  • Unique “Reverse Pin” technology prevents our linkage from flopping or rocking. This technology is built into the socket unlike the weak external supports on some competitor linkages.

ADJUSTER TUBE: 

  • Tie Rod adjuster is manufactured from large diameter ¼ inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength.
  • Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
  • Designed with right-hand and left-hand threads for quick and easy adjustment once installed on the vehicle.
  • Internal threads and tubes are also e-coated for long-term serviceability.

    * Tie Rod fits all left-hand drive JL Wrangler models 2018+ including Rubicon and requires a 1 5/8" diameter damper bracket that is not included. Check out the YETI XD Damper Bracket.

    Note: A minimum of 17” wheels is recommended.

     

    Video

     

    Installation

    INSTALL TIME

    (approx) 1 Hour

     

    SKILL LEVEL

    Moderate Mechanical Skill Required 

     

    TOOLS

  • Basic Hand Tools

  • Torque Wrench

  • INSTRUCTIONS

    YETI XD 

     

     

     

    Customer Reviews

    Based on 8 reviews
    100%
    (8)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    S
    Stephen Luebbers
    Perfect

    Setup with psc hydro assist. This is a stout tie rod.

    m
    mike driggers
    Very nice part

    Waiting to install few more parts to get

    M
    Mike Duval / Duval Offroad Designs
    Demand the Best!

    Ever since Steersmarts hit the market & I installed my 1st units, I've been a believer that this product is absolutely the best on the market. My customer base relies on me to provide the best worry-free products I can offer. I won't sell / install any other brand at my shop. Mike Duval / Duval Offroad Designs

    J
    Joe Berry
    Couldn't be happier!

    Built to last and just an all around great quality part!

    J
    Jon Kirby
    Long Lasting

    I’ve been running this for almost 20k miles and numerous off-roading trips. There is no play in any of the joints. The adjustability is so user friendly and the clamp design is way better than others on the market.

    Customer Reviews

    Based on 8 reviews
    100%
    (8)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    S
    Stephen Luebbers
    Perfect

    Setup with psc hydro assist. This is a stout tie rod.

    m
    mike driggers
    Very nice part

    Waiting to install few more parts to get

    M
    Mike Duval / Duval Offroad Designs
    Demand the Best!

    Ever since Steersmarts hit the market & I installed my 1st units, I've been a believer that this product is absolutely the best on the market. My customer base relies on me to provide the best worry-free products I can offer. I won't sell / install any other brand at my shop. Mike Duval / Duval Offroad Designs

    J
    Joe Berry
    Couldn't be happier!

    Built to last and just an all around great quality part!

    J
    Jon Kirby
    Long Lasting

    I’ve been running this for almost 20k miles and numerous off-roading trips. There is no play in any of the joints. The adjustability is so user friendly and the clamp design is way better than others on the market.